I am so in love with these adorable phone holders, and they are so simple to make using the February Kit of the Month (Club Couture) through Chalk Couture! Everything you need comes in the kit, so making these DIY Phone Holders are easy, convenient and a lot of fun!
What’s included in the Kit of the Month
- Hello Patterns Chalk Transfer® design
- Phone Stand
- Cherry Chalkology® Paste Singles
- Peachy Keen Chalkology® Paste Singles
- Meadow Chalkology® Paste Singles
Instructions
- Knead the Chalkology Paste Singles. Cut the paste singles open and squeeze the desired amount of paste onto a color tray, using a new tray for each color.
- Cut along the provided lines to separate the individual elements of your transfer
- Select one of the pattern designs from the Transfer. Remove the Transfer Backer Sheet and “Fuzz” the transfer element on a fuzzing cloth. Center the transfer element on the larger piece of the Phone Stand Surface. Smooth it out to ensure that it is properly adhered and there are no bubbles or wrinkles.
- For best results when applying paste, divide your project into sections and use the chalk-and-pull method. To perform this method, apply paste one session at a time using a squeegee or multi-tool. Once you have chalked a section, and before the paste dries, peel back the Transfer element (without removing it from the surface completely) and let the paste dry before continuing. You can use a Quick Dry Tool to expedite the drying process. Lay the Transfer element back down over the chalked section.
- Repeat steps as necessary until the design has been completely chalked. Remove your Transfer element from the surface and immediately clean the Transfer element with cool water (Do not let it soak). Dry the Transfer Element with flat with the sticky side up. Once dry, reapply the Transfer Backer Sheet and store flat.
- After the paste has dried, slide the two pieces of the Phone Stand into place.
- Enjoy your new phone stand!
Download the PDF Instructions HERE
Leave a Comment